9
Operation
4. After the first sequence is determined, press Save 1 to store the sequence.
5. To create more sequence, press New again and determine a sequence. Press Save 2
or Save 3 to store the new sequence.
6. After a sequence is saved, the Save buttons will illuminate to indicate a valid save.
7. To recall a saved processor sequence, press the respective Recall button (illumina-
tion on).
8. The Insert On switch can be used to bypass all processors.
Working with a recalled sequence
To exclude one or more processors from a stored preset, press the according
Processor Selection button (illumination off). The processor now is hard-bypassed
by relays. It can be switched into the signal path at the former position by pressing
the Processor Selection button again (illumination on).
It is not possible to add further processors to recalled sequences. Determine and
save a new sequence instead.
When you change a recalled sequence without saving it, this change will apply to
another recalled sequence as well. To avoid this, save the changed sequence or press
New before recalling the next sequence.
Erasing sequences
In order to clear the memory of Save 1-3, press New and press the respective Save
button. Now the illumination of the respective Save button is off.
