SPL Cabulator 2930, Руководство пользователя

Страница: 15 / 20

15
Cabulator
Setup 3: Speaker Simulation and Power Soak
SPEAKER IN
SPEAKER IN
Developed by Tonehunter, Germany
www.tonehunter.com
SERIAL NUMBER
8Ω
Load Only !
Connect to Speaker
Out of Amplifier
Max: 100 Watts
T ip = (+)/ Sleeve = GND
SOAK OUTPUT
SOAK OUTPUT
Power Soak
Output
T ip = (+)/ Sleeve = GND
Connect to
Speaker Cabinet
4 Ω to 16 Ω Load
Transformer Bal.
Line Output
T ip = (+)/ Ring = (–)
Sleeve = Audio GND Only!
DC 9V
Connect to
Recording Device,
Stagebox, etc.
D.I. OUTPUT
D.I. OUTPUT
DC POWER
DC POW ER
– +
® The Tonehunter logo is a registered
trademark of Tonehunter Ltd.
MADE IN GERMANY
IN ORDER TO AVOID POSSIBLE DAMAGE OF
YOUR GUITAR AMPLIFIER DO NOT SET ITS
MASTER VOLUME ABOVE 70%.
REFER TO MANUAL FOR MORE INFORMATION.
IMPORTANT ADVICE
Sound Performance Lab
www.spl.info
® The SPL logo is a registered
trademark of SPL electronics GmbH
1:
Connect 8 ohms amplifier output via speaker cable to SPEAKER IN at the Cabulator.
2:
Connect Cabulator SOAK OUTPUT via speaker cable to 4-16 ohms cabinet.
3:
Connect Cabulator D. I. OUTPUT via line cable to the line input of a following unit.
3
1
2
Console, AD converter, stage box, etc.