3
General Information
The LCD BASS METER portable noise meter is intended for measuring the noise level and
sound pressure at the low frequency. The source of the measured signal can be provided by both
industrial equipment and acoustic systems. The main advantage of this noise meter is complete
autonomy of work. For carrying out measurements you won't need a computer; all data is
processed and calculated in the device and depicted on its display. If it is necessary to receive
more detailed information, such as spectrum or signal waveform, the device can be connected to
a PC using USB port. Using the NEXT-LAB SPL Sensor pressure transducer allows receiving
results with high accuracy of 0.1 dB. The device has Lab-Bus digital bus port, to which the
pressure sensor, microphone or power sensor can be connected. When user at the beginning
purchases, for example, a set for measuring sound pressure, in future they can supplement it with
the microphone for measuring AFC or with the power sensor for measuring current and voltage.
Ergonomics
The LCD BASS METER device is performed as the main unit and detachable sensor with
vacuum suction cups for affixing in to any smooth surface, for example, glass. The the cable
between the main unit and the sensor can be several meters long, which allows a user to be at
some distance from the spot of measurement. At the main unit there are controls and two-line
LCD display with micro-light for comfortable use of the device indoors or in the passenger
compartment of a car. The device can operate on batteries, which should be inserted into the
case, or from USB. The USB port is intended for power supply, updating the microcode and
transferring data to a PC. The case of the device is made of the shockproof plastic material.
Package Contents
Main unit
USB connection cable for charging and connecting the device to a PC
Spl-Lab Measuring Center software for Windows
Audio-CD with audio tracks for tuning (sine, sweep-tones, noise)