15
6.2 Moving Test (Prior to each use)
Make sure this test is performed with the caddy in a wide and safe area, free of
obstructions or valuables, such as people, parked automobiles, flowing traffic, furniture or
water bodies (rivers, swimming pools etc.), steep hills, cliffs or similar hazards.
a. Manual Control Operation
Test the manual function first:
(i) The manual functions of the caddy are controlled through the variable speed control
knob on the right side of the handle. Ensure the variable speed control knob is at its “0”
position. To verify, the knob should be turned counterclockwise until it stops.
(ii) Turn the main switch to “On” (I) position.
(iii) Turning the knob forward (clockwise) will increase the forward movement speed of the
caddy.
(iv)
To slow down or stop the caddy, turn the knob backwards (counterclockwise).
b. Remote Control Operation
Make sure you are close to the caddy at all times while testing it and familiarizing
yourself with the remote control!!!
Now turn on the main power switch (“I”), and make
sure that the rheostat control knob is in “0” position. One touch of the Forward/Backward
arrows on the remote control starts the caddy in either direction. Further pushes increase
the speed.
In order to stop the caddy press round red STOP button in the middle of the
remote
!! To turn the caddy in either direction, push the left or right arrows briefly. Once
you release the button the caddy will continue in the current direction at the same speed
prior to the turning command. You will notice that the caddy reacts promptly to any
turning command, so it will take you some practice to get just the right touch for turning
maneuvers. Please be aware that the turning characteristics will change depending on the
surface (grass, asphalt), the slope or the weight (loaded, unloaded) of your caddy.
