17
2. Turn the temperature adjustment knob to achieve
desire cleaning temperature.
3. After hot water use, press burner stop button (0).
This will turn OFF the hot water and change back
to cold water mode for cleaning.
1. Fill the detergent tank with cleaning solution. Only
use a cleaning detergent approved by the
manufacturer and do not use under any
circumstance acid or corrosive products (contact an
authorized service agent or the manufacturer if in
doubt).
2. If detergent is required it
CAN BE USED IN LOW
PRESSURE ONLY
.
3. Open the chemical injector by turning the knob
anti-clockwise until the desired affect is reached.
When the trigger is pulled, water mixed with
detergent will be sprayed.
4. Never allow sprayed detergent to dry on the
cleaning surface, as this may damage the
surface.
USING CLEANING AGENT
