background image

11 

L-L 283.01-SW 

Warning 

If the heater is not used continuously, stop it by first closing the gas supply 

stopcock and then switch it off or by turning down the thermostat this allows the 

gas in the gas tube to be fully used and avoids any future leak when removing 

the gas tube. 

 

Warning 

The reset button (8) may have different light types: 

• light off: unit is working normally, flame is regular. 

• fast flashing: unit is running on starting cycle. 

• slow flashing: unit is in stand-by status, waiting for heating  request. 

    • steady light: lock-out status. 

 

TRANSPORTING AND HANDLING 

The space heater can be lifted and moved easily by means of its handle. 

Remove all or any packaging before use. 

 

Warning 

Before moving the unit: 

• Stop the heater as indicated in the “STOP” paragraph; 

• Disconnect the power supply by removing the plug from the power socket; 

              • Close the gas stopcock and disconnect the gas hose; 

              • Wait until the heater cools. 

 

Warning 

During transportation and/or storage, make sure the gas valve group and gas 

connection pipes are not knocked or damaged in any way. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание JETFIRE J20A



















Отзывы: