ZE50
10
adjusted manually by pressing the Up/Down buttons. Distance and Calories will accrue,
starting from zero.
The Calorie window will switch between Calories and Watts every 5 seconds. The Calorie
reading shows total Calories burned and is an approximate number. The Watt reading
indicates how much work you are doing. If the Watt reading is 100, this means you are
doing enough work to light a 100 watt light bulb.
The bottom left data window will switch between RPM and Speed every 5 seconds. RPM is
your actual pedal rotation speed, and the Speed readout is in MPH, indicating approximate
road speed as if pedaling a bicycle in 7
th
gear.
The Distance window shows distance traveled, based on pedal speed, in miles. The Pulse
window will display your heart rate in beats per minute if you are holding the heart rate
hand sensors, or wearing a chest strap transmitter.
Manual
Using the Up/Down keys, highlight the Manual icon at the top of the display and press
Mode key. The profile will be blinking and you may use the Up/Down keys to adjust the
program work level and then press Mode. The Time window will now be blinking. Use the
Up/Down keys to adjust the program Time and then press Mode. The Distance window will
now be blinking and you can adjust a target Distance using the Up/Down keys then press
Mode. Calories will now be blinking, repeat the same process as above to set, then press
Mode. The Watt icon will be blinking. If you choose to set the Watts then the machine will
automatically adjust the workload to maintain continuous work. What this means is that if
you set the Watt to 100 the machine will try to keep you working at a rate of work that
equals 100 Watts (or working at a rate that will keep a 100 Watt light bulb burning). Watts
are determined by the amount of work you are doing. On the ZE50 Elliptical this means the
speed you are pedaling at combined with the workload of the machine. In Watt mode, if you
change your speed the machine will automatically change the workload to maintain the
same Watt level. If you pedal faster the workload will decrease and if you pedal slower the
workload increases.
After adjusting all the parameters, press Start to begin your workout.
Preset Programs
There are 12 preset programs to choose from. After power up, or reset, press the Up/Down
keys to highlight the Program icon. Press the Mode key to enter the program mode. The
display will show P1, for two seconds, then change to the P1 program profile. You may
keep pressing the Up/Down keys to scroll through the 12 programs. When you see a
program you want, press the Mode key to enter. At this point you may press start to begin
the program with the default settings or you may customize the program.
To customize the work level, press the Up key. You will see the profile increase in size.
When the work level is where you like it press the Mode key (If you do not want to
customize the profile, just press the Mode key to bypass).
The Time window will now be blinking. Use the Up and Down keys to adjust the workout
time and then press Mode.
The Distance window will now be blinking. Repeat the same process to set the distance to
Содержание ZE50
Страница 8: ...ZE50 7...
