Spirit XE 125, Руководство пользователя, Страница: 9 / 25

XE Series Elliptical
8
STEP 3: CONNECTING ARM ASSEMBLY
1. Align the hole in the end of the Connecting Arms (L&R)(7&8)(pivoting rod end) with the
hole in the bracket of the Lower Handle Bar (L&R) (4&5). The rod end should be on the
inside of the Lower Handle Bar (L&R) (4&5). bracket. Take 2pcs of 5/16"×1-1/4" Hex
Head Bolts (71) and install it through the Lower Handle Bar (L&R) (4&5)) bracket and
the rod end. Install 2pcs of 5/16"×20×1.5T Flat Washers (98), 2pcs of 5/16"×7T
Nylon Nuts(105) tighten firmly using the 12m/m Wrench (110) on the 5/16"×7T Nylon
Nut (105)and one on the 5/16"×1-1/4" Hex Head Bolt (71).
2. Install the 2 pcs of Rails (15) into the receiving bracket in the end of Main Frame(1) with
2 pcs of 3/8” × 2-1/4” Button Head Socket Bolts (77) , 2pcs of 3/8"×19×1.5T Flat
Washers(94) and 2 pcs of 3/8"×7T Nylon Nuts (89) by using 2 pcs of 13/14m/m Wrench
(111).
3. Put the Lug Cover (L) (61) and Lug Cover (R)(62) onto the Rail Strap (16).
Install the Rail Tubes (15) with 2 pcs of 5/16” ×3/4” Button Head Socket Bolts (76) and
2 pcs of 5/16"×20×1.5T Flat Washers (98) by using Combination M5 Allen Wrench &
Phillips Head Screw Driver (108).
STEP 4: PLASTICS ASSEMBLY
1. Install the Connecting Arm Covers (L & R) (59 & 60) over the connection of the rod end
and Lower Handle Bar (L&R) (4&5) with 4pcs of M5×15m/m Phillips Head Screws(79)
and 2pcs of Ø 3.5×12m/m Sheet Metal Screws (84) by using the Combination M5 Allen
Wrench & Phillips Head Screw Driver (108).
2. Install the 2pcs of Slide Wheel Cover (52) using the 4pcs of M5×15m/m Phillips Head
Screws(79).
3. Install the Front Handle Bar Cover (L & R) (54 & 56) and Rear Handle Bar Cover (L & R)
(55 & 57) over the Handle Bars axle connections with the 6 pcs of Ø 3.5×12m/m Sheet
Metal Screws (84) by using Combination M5 Allen Wrench & Phillips Head Screw Driver
(108).
PLEASE ENSURE ALL FASTENERS ARE TIGHT AFTER THE COMPONENTS HAVE
BEEN ASSEMBLED.
POWER CONNECTOR LOCATED ON
FRONT, LEFT HAND SIDE OF UNIT.