XE100 / XE200 / XE300 Elliptical
33
Heart Rate Control Program 1 & 2 (HR 1, HR 2) operation
Both programs operate the same, the only difference is that HR 1 is set to 60% and HR 2 is set to
80% of maximum heart rate. They both are programmed the same way.
To start the
HR 1 or HR 2
programs follow the instructions below or just press the HR 1 or HR 2
button then the Enter button and follow the directions in the message window.
10. Press the
HR 1 or HR 2
key then press the
Enter
key.
11. The message window will ask you to enter your
Age
. You may enter your Age, using the Up
and Down keys or the numeric key pad, then press the Enter key to accept the new number
and proceed on to the next screen.
12. You are now asked to enter your
Weight
. You may adjust the Weight number using the Up
and Down keys or the numeric key pad, then press enter to continue.
13. Next is
Time
. You may adjust the Time and press enter to continue.
14. Now you are asked to adjust the
Heart rate Level.
This is the heart rate level you will
experience during the program. Adjust the level and then press enter.
15. Now you are finished editing the settings and can begin your workout by pressing the Start
key. You can also go back and modify your settings by pressing the Enter key. NOTE: At any
time during the editing of Data you can press the Stop key to go back one level, or screen.
16. If you want to increase or decrease the workload at any time during the program press the Up
or Down key. This will allow you to change your target heart rate at any time during the
program.
17. During the HR 1 or HR 2 programs you will be able to scroll through the data in the message
window by pressing the
Enter key.
18. When the program ends you may press Start to begin the same program again or Stop to exit
the program or you can save the program you just completed as a
custom user program
by
pressing a User key and following the instructions in the message window.
