Spirit KING-416, Инструкция по эксплуатации

Страница: 8 / 24

10. The FX controls give continuous adjustment of the level sent from the
input channel to the FX busses. The level adjustment is from + 10dB to off
with 0dB at the centre position of the rotary control. The FX controls are
connected post-fader and send the mixed left/right signal to the FX
Busses.
12. The AUX controls give continuous adjustment of the mixed left/right signal
level sent from the input channel to the AUX busses. The level adjustment
is from + 10dB to off with 0dB at the centre position of the rotary control.
AUX1 and 2 can be configured globally for pre- or postfader operation
by pressing the PRE/POST switch on the appropriate AUX-rail in the master
section.
14. The MUTE switch mutes the input channel at all points, including all
auxiliary sends.
11. The MON controls give continuous adjustment of the level sent from the
input channel to the MON busses. The level adjustment is from + 10dB to
off with 0dB at the centre position of the rotary control. The MON controls
are connected prefader, pre equaliser and send the mixed left/right
signal to the MON bus-Ses.
13. The BAL (pan) control is used to balance the relative levels of the left and
right channel signals that are sent to the masters or groups. The control
has a constant power law, i.e. -3dB at the centre position and + 0dB or
off at either extreme setting. If the Stereo channel used as mono input,
the BALANCE (pan) controls the channel placement within the master
stereo- or group mix.
15. The SOLO switch sends the input channel signal to the PFL/ mono and AFL/
stereo busses. If the switch is engaged, the mon1/2 meters are
automatically used for solo metering.
17. The FADER gives continuous adjustment of the input channel level from
+10dB to off.
16. The SIGNAL (-16dBu) / PEAK (+16dBu) display monitors the peak signal
level of the pre fader input channel.
18. The 1-2 switch connects the post fader channel signal to the group 1-2
busses via the bal (pan) control
19. The 3-4 switch connects the post fader channel signal to the group 3-4
busses via the pan control.
20. The MAS switch connects the post fader channel signal to the master
stereo bus via the pan control.
0
+10
8
0
+10
8
0
+10
8
0
+10
8
0
+10
8
0
AUX 1
AUX 2
MON 1
PRE
MON 2
PRE
FX 1
POST
FX 2
POST
STEREO INPUT
+10
8
R L
0
BAL
MUTE
17-18
SOLO
PK
SIG
10
5
0
5
10
15
20
25
40
60
80
8
1-2
3-4
MAS
10
11
12
13
14
15
16
17
18
19
20
5
STEREO INPUT CHANNEL