11
FUNCTIONS
Speedy Start (P0MANUAL mode)
Press START button to speedily start the treadmill after turning on the power and putting on the
safety key. Both speed and incline will be at the lowest value. The user has to adjust them to the
desire levels manually.
There are two modes in using the MANUAL mode. One is the speedy start as described above to
use the preset parameters and accumulate the counts. The other is the count-down mode as
procedures below.
A. Use PROGRAM button to choose PO MANUAL then press ENTER to set parameters.
First is setting weigh. Use FAST/SLOW buttons to adjust the weigh and press ENTER for
next setting.
B. Now the AGE will be displayed. Use FAST/SLOW buttons to select the correct value
then press ENTER for next setting.
C. Choose one of count-down factors TIME, DISTANCE, CALORIES and use SELECT to
confirm then press ENTER to set the value. You can press SELECT to return to select the
factor again.
D. Now the selected factor and the value will be displayed. Use FAST/SLOW buttons to
select the proper value and press START to start the treadmill and finish the setting.
E. You can press STOP button to return to the previous step or START to start the treadmill.
RANDOM PROGRAM
This mode which is a profile includes speed and incline automatically generated by the program.
The user can continually choose the profiles until the one which is satisfied. It can also save the
USER mode and make adjustments until a most suitable profile is reached. The operation is as
follows:
A.
Use PROGRAM button to select RANDOM PROGRAM mode and press ENTER to profile
selection.
B.
Now the dot matrix will display speed profile for 5 seconds then switch to incline profile for
another 5 seconds and recycle. Press ENTER to select the profile and forward to enter next
parameter. Press SELECT button to generate new profile. This step can be continued until
ENTER is pressed.
C.
Now the value of the weight is displayed. Use FAST/SLOW buttons to adjust the weight and
press ENTER for next setting.
D.
Now the value of the age will be displayed. Use FAST/SLOW buttons to adjust the age and
press ENTER for next setting.
E.
Now the preset time 20:00 will be displayed. Use FAST/SLOW buttons to adjust for proper
time duration and press START to start the treadmill.
F.
The profile can be saved as an USER profile when the workout is finished. The USER can be
adjusted whenever is necessary.
Содержание ESP0030 -Esprit CT100
Страница 19: ...18 OVERVIEW CHART...
