S
S
e
e
r
r
v
v
i
i
c
c
e
e
M
M
a
a
n
n
u
u
a
a
l
l
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
1
1
6
6
After removing safe key,
treadmill can’t stop.
1. Reed switch of console is broken.
1. Replace with new reed switch or
console.
LCDs not bright,
incomplete or imperfect.
1. LCD light is broken.
2. Power to console too low.
1. Replace with new LCD or console.
2. Check AC power is 110-120V.
3. Check power to console.
4.Replace lower controller.
LCD displays not bright,
incomplete or imperfect.
1. LCD displays are broken.
1. Replace with new console and calibrate
it.
When press “START”
button to start treadmill,
running belt isn’t running
and window displays “Loss
Speed” error message after
8 seconds.
1. Controller experienced unusual shut down; the Shut_D light
will be always bright. (
Controller debugging form
)
2. Motor wires (red, black) aren’t plugged into controller.
3. Computer cables not connected properly.
4. Computer cables are broken or damaged.
5. Motor belt is broken.
6. Controller is broken.
7. Motor is broken.
8. Console is broken.
1. Turn off power and reset the treadmill.
2. Plug wires again.
3. Plug the wire again on controller,
connector and console.
4. Replace with new wires.
5. Replace with new motor belt.
6. Replace with new controller.
7. Replace with new motor.
8. Replace with new console.
SPEED windows display is
not 1.0 to 18.0 km
Monitor is not calibrated.
Calibrate the console
INCLINE windows display 1 Console is not calibrated.
1 Calibrate the console.
All manuals and user guides at all-guides.com
