Customer Service 1-888-707-1880
9
Dyaco Canada Inc. 2013
Email: [email protected]
UPRIGHT TUBE ASSEMBLY
1. Take the Left and Right upright tubes (part numbers
5
&
4
) and slide the upright covers (
99
&
100
right) onto the tubes (observe the cover orientation is correct). Connect the Middle Console
Cable (
38
) that exits from the bottom of the right upright tube with the lower Console Cable (
39
).
Insert the Left and Right (
5
&
4
) Uprights into the Left and Right Receiving Tubes (holes are on the
outside of the tubes). Be careful not to pinch the wire when installing the upright.
NOTE: Partially tighten all bolts in this Step. This will allow for easier console assembly.
2.
Attach the tubes with three Button Head Socket Bolts (
93
) from each side and two Button Head
Socket Bolts (
93
) and two Curved Washers (
94
) from the front. Partially tighten using the
Combination M5 Allen Wrench & Phillips Head Screw Driver (
96
)
HARDWARE
1
#
93
. 5/16” x 15mm
Button Head Socket Bolt
(8 pcs)
#
94
. 5/16” x 19 x 1.5T
Curved Washer (2 pcs)
