CUSTOMER SERVICE 1-888-707-1880 1612275
0
©
2007
16
Programmable Features
Factory preset programs (P1~P5), 2 user defined programs, and one Manual program.
Each preset program has a maximum speed level that is displayed when a desired workout is chosen.
The maximum speed that the particular program will achieve will be displayed in the Speed window.
Also included are two user programs (User 1 and User 2) for custom workouts.
To Select a Program:
STEP 1:
Press the
PROGRAM
▲▼
key to select desired program. Press enter to select the program.
The display will prompt you through the programming or you can just press Start to begin the
program with default values.
STEP 2:
If enter was pressed,
the
Time
window will display with the default value of 20 minutes.
You may use any of the up/down, fast/slow keys to adjust the time. After adjusting, or to accept the
default value, press enter. (Note: You may press start at any time during the programming to start the
program.)
STEP 3:
The
Calorie
window will now be displaying a value, which is your
Body Weight
. Entering
the correct body weight will affect the calorie count. Use the Up/Down keys, Fast/Slow to adjust,
then press enter.
A note about the
Calorie
display: No exercise machine can give you an exact calorie count because
there are too many factors which determine exact calorie burn for a particular person. Even if
someone is the exact same body weight, age and height, their calorie burn may be very different than
yours. The
Calorie
display is to be used as a reference only to monitor improvement from workout
to workout.
STEP 4:
The
Calorie
window will display the preset top speed of the selected program. Use the
Up/Down, Fast/Slow keys to adjust, then press enter. Each program has various speed changes
throughout; this allows you to limit the highest speed the program can reach.
User Programs:
STEP 1:
Select User 1 or User 2 via the
PROGRAM
key then press
Enter
. Note that the dot matrix
display portion will have a single row of dots at the bottom (Unless there is a previously stored
program).
STEP 2:
Note the Time window is flashing. Use the
Adjust UP/DOWN
keys to adjust up from 10
minutes (if desired). Press
ENTER
key. This is a must to continue even if time is not adjusted.
STEP 3:
The Calorie window will now be blinking a bodyweight value. Enter your bodyweight and
press
Enter.
STEP 4:
The Calorie window will now be blinking an Age value. Adjust the age and press enter.
