COMPATIBLE
TM
SWITCH
WWW.SPIRITOFGAMER.COM
COMPATIBLE
TM
SWITCH LITE
1. How do I program a Macro?
Caution: to program a macro, your controller must be turned on. You can program a macro on the left joystick and a macro
on the right joystick. When programming a macro, you must use the buttons on the corresponding joystick. You cannot
program a macro from the blue joystick to the red joystick and vice versa.
To activate the Macro mode, press the Macro button for 3 seconds, the LED will blink slowly. Release the Macro button
Then press the desired buttons to create your macro, you can apply a delay if needed between each button. Then to
record, press the Macro button again.
Example with the Right Joystick: You decide to create the Macro: Buttons A, B, X. Press the Macro button for 3 seconds.
The LED flashes, Release the button! Press button A and wait after 1 second to press button B. After 3 seconds, press the
X button when you have finished adjusting the B button. After setting, press the "Macro" button to save and exit the
mode.
The Macro button is then A button: 1s, B button: 3s, X button
When you enter your Macro, you can therefore record an interval between each button.
Refer to the Tips chapter to find out how to view the Macro entered
2. How do you erase your Macro?
To erase your Macro, press the Macro button for 5 seconds: the LED flashes quickly.
Your macro is erased.
The Turbo function allows the key to be triggered automatically without having to press it each time.
Caution: The supported buttons are : A, B, X, Y, L, R, ZL, ZR. You can program a Turbo function on the left joystick and another
one on the right joystick. When programming a Turbo function, use the buttons of the corresponding joystick. You cannot
program a macro from the blue joystick to the red joystick and vice versa.
To assign the Turbo function, hold down the Turbo Button and press the desired button(s).
Example with the Right Joystick: You decide to create the Turbo on two Buttons A and B. Hold the Turbo Button and press
the A and B Buttons. When finished, release the Turbo Button. Hold down A or B to activate the, button. As long as you
hold down the A Button, the button will be activated! Without turbo the button will be activated once.
With Turbo: AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
Without Turbo: A
Refer to the Tips chapter to find out how to view the Macro input.
The LED flashes when you press a button with the turbo function.
To cancel the turbo function, do the reverse. For example, if you have activated the function on Key A, hold down Turbo and
press the key to deactivate it.
