2
Installation:
Before making the connections, we invite you to authorize the use of a PRO
controller via the interface of your Nintendo SWITCH: Home Menu > Console
Settings Menu > Controllers & Sensors Menu > Select Pro Controller Wired
communication > Select Yes.
Please note that if you do not request authorisation, you may receive an error code
Nintendo SWITCH 2011-0304.
1. Connect the converter to the console via the included USB cable.
The white LED indicates that the converter is properly connected.
2. Connect your keyboard to the converter. The LED flashes yellow... connection in
progress! White LED, the keyboard is connected.
3. Connect your mouse to the converter. The LED flashes yellow... connection in
progress! White LED indicates that the mouse is connected.
4. Press Ctrl+ [2 é ~] to activate the switch mode. The red LED on Cross Game 2
indicates that your keyboard and mouse are connected and you can use them.
(If your Nintendo SWITCH goes into sleep mode, you will need to do this step
again to reactivate it).
Ctrl
2
é
˜
+
CROSSGAME 2
DO NOT PLUG
ANYTHING INTO THE
CONTROLLER SOCKET
NINTENDO SWITCH
