Spirit Halloween Spirit Ghost Trap Wheels Upgrade kit, Руководство пользователя

Страница: 10 / 11

Next drill one corner with the 9/32” drill and use one of the short screws #3 to hold the truck in
place. Take care when drilling. There are wires inside this are of the trap, so do not drill too
deep! In this trap, I taped the wires out of the way when I installed the cosmetic kit. If you did
not do that, you may need to take apart the trap and make sure the wires are not going to get
damaged when drilling before you do this!
Next drill the diagonally located hole and attach the screw. This should allow you to make sure
the truck is positioned correctly before drilling the other two holes and then screwing in two
more short screws #3.
Do the same for the other truck.