5/6
OPTIONAL STEP PAD SETUP
Follow steps 1 through 7 on the installation
1. Connect the wire from the optional Step Pad to the jack
labeled “STEP PAD” on the control box. See Fig. 24.
2. Step on the Step Pad to activate the prop. See Fig. 25.
Step Pad (SKU #01181288) is sold separately and can be
purchased in-store and online at www.SpiritHalloween.com
OPTIONAL EXTERNAL SPEAKER SETUP
This prop can be played through an external speaker
(sold separately). To use this feature, follow steps 1 through 7
1. Connect the wire from your external speaker to the jack
labeled “SPEAKER” on the control box. See Fig. 26.
2. Adjust the volume level to suit. See Fig. 27.
Note: Use external speakers with an impedance of 8 ohms only.
25
OPTIONAL MULTI-PROP REMOTE SETUP
Follow steps 1 through 7 on the installation
1. Connect one of the transponders to the prop by inserting the
wire of the transponder into either the Try Me or Step Pad
jack as labeled on the control box. See Fig. 28.
2. Flip the switch on the transponder to the ON position.
Click the button on the Multi-Prop Remote that matches
the letter on the transponder to activate the prop.
See Fig. 29.
OPTIONAL BATTERY ADAPTER SETUP
Follow steps 1 through 7 on the installation
1. Install 4 D Batteries into Spirit Battery Adapter.
See Fig. 30 .
2. Connect wire from Spirit Battery Adapter to the 5.9V3.0A
adapter port on the control box. See Fig. 31.
3. Turn switch on Battery Adapter to the ON position
to power the prop.
30
29
24
26
27
28
31
1.
2.
3.
The infrared sensor distance and ambient temperature are directly related. When the body temperature
(98.6° F) is different to the ambient air temperature, the infrared sensor distance will be farther. When the
body emperature (98.6° F) is close to the ambient air temperature, the infrared sensor distance will be shorter.
Do not use this item in an environment where air currents are caused by a window, air conditioning, or air outlet.
Do not have the infrared sensor face a direct source of heat such as a heater.
IMPORTANT INFORMATION:
Secure all the hook & loop closures at the back of the (N) Trench Coat as
shown.
Secure the (N) Trench Coat to the top of the (G) Torso Frame by using the
available hook & loop closures as shown.
22.
23.
Your Mr.Salty is now fully assembled. Plug in and turn on to let the fun begin!
N
N
N
22
23
G
G
