WARNING: This product contains chemical(s) known to the state of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. Installation of all products must be completed by a qualified
professional installer. Spiral Audio and/or dealers are not responsible for direct or indirect damages.
Remove the factory radio and the
air vent cover
Cut the front of the vent duct as
shown. Measure carefully with the
mounting cage before the final cut
Insert the paddles into the cut ducts
using the “U” section to guide the
right position. Remove the paper
and attach the foam block in central
position.
Install the cage in position ensuring
correct alignment with the foam
block and screw in place
Push the paddles against the sides
of the aftermarket radio to ensure
correct air flow from the ducts.
Carefully install the housing panel
locating the upper clips first and
the lower section after
INSTALLATION
INSTRUCTIONS FOR
KT-FI001PB/RB/WP
1
2
3
4
5
6
www.spiralaudio.com
ELEVATING YOUR CAR AUDIO EXPERIENCE
5
3
4
2
