- 2 -
Assembly Instructions
40
35
20
20
35
40
25
50
Step 1:
After opening the box,
remove
the
installation
and
operation manual. Remove the box
which is wedged inside the top
piece of foam. Finally, remove the
machine from the box.
Step 2:
Take the
4mm Allen Key
(15)
and insert it into the internal
adjustment screw. This is located
under the turntable and will allow
the turntable to spin freely.
Step 4:
Take off the
tension bar
end cap (7)
and place the
drop
weight (5)
onto the
tension bar (6)
.
Step 3:
Take the
drop weight knob
(4)
and insert it into the hole of the
drop weight (5)
.
Step 5a: For Badminton
Make sure that you only use 1 part
of the
drop weight (5).
You can split
this into 2 using an Allen Key. Use
the piece which fits the
drop weight
knob (4)
. To set the desired tension,
position the
drop weight
(5)
at the
desired
poundage.
See
the
example (left) to set the tension for
20 pounds.
Step 5b: For Tennis
Tennis requires both parts of the
drop weight (5)
to be connected
(default setup). To set the desired
tension, position the
drop weight
(5)
at the desired poundage. See the
example (left) to set the tension to
40 pounds.
