PlayLimit.com
PlayLimit.com
7
6
One Game Console and VCR Setup
1
Remove the Security Panel.
Use a Coin Box key to open the front door. Use a Phillips-head screwdriver (not supplied) to remove the
Security Panel screw. Pull down on the Security Panel to detach it.
This manual uses VCR to refer
to VCRs, DVD players, or a
VCR/DVD combination units.
For setups that include multiple
VCRs or DVRs (Digital Video
Recorders), go to
http://www.playlimit.com/setup
Use only the power supply
included with the PlayLimit.
Other power supplies may
damage the PlayLimit.
Setup the PlayLimit on a flat,
level surface so that tokens can
drop through properly.
If the TV has only one jack for
audio, connect the right (red)
component cable plug.
If you control VCR viewing with
game viewing, the game console
cable is not secured within the
PlayLimit and can be easily
plugged directly into the TV,
bypassing the PlayLimit.
If you control VCR viewing with
TV viewing, you must put the TV
to either Channel 3 or 4 to view.
2
Pick a setup strategy:
Control VCR viewing with TV viewing:
Connect the coaxial cable from a TV source (such
as cable or satellite TV) to the VCR. Connect the VCR to the PlayLimit with a coaxial cable
(not supplied). Connect a coaxial cable (supplied) from the PlayLimit to the TV. Connect the
Game Console composite cable to the PlayLimit and then connect the PlayLimit composite
cable (supplied) to the TV.
Control VCR viewing with game viewing:
Connect the game console cable to the VCR
inputs. Connect the VCR composite cable (not supplied) to the PlayLimit and then connect
the PlayLimit composite cable (supplied) to the TV. Connect the coaxial cable from a TV
source (such as cable or satellite TV) to the PlayLimit, and connect the coaxial cable (supplied)
from the PlayLimit to the TV.
Do not control VCR viewing:
Connect the VCR directly to the TV and then follow the
instructions for One Game Console Setup on Page 4.
3
Reattach the Security Panel.
Align the tabs and slide the panel into place, making sure cables fit through the slots without pinching.
4
Insert and tighten the Security Panel screw.
5
Connect the power supply cable (supplied) and plug the power supply into an AC outlet.
6
Put the Mode Switch to
TOKEN.
7
Put the Control Switch to
BOTH.
8
Close and lock the Coin Box door.
9
Test the system:
a)
Start the VCR and TV and turn the TV channel to the video input for the VCR. Insert a tape
or disc in the VCR and press PLAY. The TV shows a blank screen. Insert tokens to begin viewing.
b)
Start the game console. On the TV, select the video input for the game console. The TV shows
a blue screen with OUT OF TIME on it. Insert tokens to begin play.
PlayLimit
Game Console
TV
Source
110 AC
Outlet
TV
Coaxial Cable
Composite Cable
Game Console
Composite Cable
Power
Supply
VCR
