IMPORTANT SAFETY INFORMATION – ADULT SUPERVISION IS REQUIRED
PROBLEM
SOLUTION
CAUSE
TROUBLESHOOTING GUIDE
• Keep propeller clear from face, eyes and fingers. Do not launch at
people or animals.
• Pay attention. Make sure people around you know you are playing with
Blue Sky
TM
. Point plane away from face when launching. Use only the
pump included in this package. Other pumps may damage the plane or
lead to injury. Never pump anything except air into the engine. Do not
leave air in reservoir.
• Do not leave your Blue Sky
TM
AIR TANK pressurized in direct sunlight
and/or extreme heat for excessive amounts of time.
• Do not fly in very windy conditions. Do not fly plane in temperatures
below 45°F/7°C or the wings will become brittle and may break, and
engine performance will decrease.
• Do not fly near overhead wires, trees, buildings, or other obstructions.
• After your last flight, spin the propeller to make sure all the air has been
used up. Only use your Blue Sky
TM
plane in grassy open area. To stop
the propeller, gently touch the nose cone to the grass.
Engine will not start.
Blue Sky
TM
does not have a level
flight path.
Blue Sky
TM
AIR INTAKE will not fit into PUMP
NOZZLE.
Wings on your Blue Sky
TM
get damaged.
• No air in AIR TANK.
• Blue Sky
TM
AIR INTAKE or PUMP
NOZZLE are clogged with dirt.
• TAIL WING FLAPS not adjusted properly.
• Check for dirt in Blue Sky
TM
AIR
INTAKE or PUMP NOZZLE.
• Pump up Blue Sky
TM
and make sure PROPELLER
is horizontal.
• Clean out AIR INTAKE with a toothpick and
re-pump.
• Re-adjust the TAIL WING FLAPS. FLAP UP to
prevent dives and FLAP DOWN to prevent stall.
• Clean out with a toothpick.
• The wings can easily be repaired with clear tape.
Spin Master Ltd., 450 Front Street West, Toronto, ON M5V 1B6 Canada
Spin Master, Inc., PMB #10053, 300 International Drive, Suite 100,
Williamsville, NY 14221, USA
Spin Master Toys Far East Limited, Rm #1113, 11/F,
Chinachem Golden Plaza, 77 Mody Rd., Tsimshatsui E., Kowloon, HK
North American Consumer Information
Phone: 1-800-622-8339
www.spinmaster.com
AIR HOGS ® is a registered trademark and Blue Sky TM
is a trademark of Spin Master Ltd. © 2007 Spin Master Ltd.
All rights reserved. Conforms to product safety standards
ASTM F963, EN71 Regulatory Requirements. Please retain
this information for future reference. Please remove all
packaging material before giving to children. Products and
colors may vary. MADE IN CHINA.
#20012429 NEN REV 1
TM
DISPOSAL INFORMATION
When your Blue Sky™ plane is no longer functional, its components can be disposed of in the following manner:
Foam
Wing Assembly
Engine
Foam
Engine
Surround
Foam Engine Surround
Remove
Decals
Air Pressure
Bottle
Packaging Materials
All Blue Sky™ packaging materials and
instruction sheets are readily recyclable
through your local program.
Aircraft Wings and Body
All foam materials are made of polystyrene.
Please dispose along with your regular
solid waste garbage, or in your blue box
if polystyrene recycling facilities exist in
your area.
6
PS
A
Remove 2 screws from
front engine component.
B
Remove 3 screws from
rear engine component.
Air Pressure Bottle
This bottle is made from recyclable PETE.
A.
Using a small Phillips head (star)
screwdriver, carefully remove the 2 screws
from the front engine compartment.
B.
Remove the front engine compartment
and then remove the 3 screws securing the
bottle to the engine.
Detach the bottle and dispose through your local recycling
program.
1
PETE
All remaining parts: The pump, motor and all remaining parts are non-recyclable. Please dispose of appropriately.