FLIGHT INSTRUCTIONS
STEP 1
CAUTION: Only use pump supplied with AIR HOGS
®
Sky Shark
TM
.
Do not use any other source to pump AIR HOGS
®
Sky Shark
TM
.
STEP 7
Apply your AIR HOGS
®
stickers to the surface
of the MAIN WING and
VERTICAL TAIL WING.
See packaging for
placement of stickers.
Make sure your stickers
are on flat, because
creases in the stickers
will affect the flight.
Stickers
PUMP UP YOUR SKY SHARK™
STEP 2
STEP 3
Push the plane’s
AIR INTAKE
down onto the
PUMP NOZZLE.
Pump 50 times
(or until the air
tank is full).The
pressure release
valve will release
air or whistle
when AIR TANK
is full.
Carefully
remove the
plane AIR
INTAKE from
the PUMP
NOZZLE.
STEP 1
STEP 2
Hold the plane in
your launching
hand and strike
the propeller with
your other hand.
Launch your
Sky Shark
TM
against the
wind for best
take-off and
flight results.
BASIC FLYING TIPS
Gently bend both
HORIZONTAL TAIL FLAPS
down to
prevent plane from
crashing/stalling.
Gently bend both
HORIZONTAL TAIL FLAPS
up to make the plane
climb
higher/faster.
Gently bend the RIGHT TAIL
FLAP up to make the plane
bank to the
right.
NOTE: No change to the
LEFT TAIL FLAP.
Gently bend the LEFT TAIL
FLAP up to make the plane
bank to the
left.
NOTE: No change to the
RIGHT TAIL FLAP.
STEP 6
Install the
VERTICAL TAIL
WING by sliding
it into the TAIL
WING HOLDER.
Tail
Wing
Holder
Vertical
Tail
Wing
Pump
Nozzle
Air
Intake
Pump
Nozzle
Air
Intake
45°
Left Tail
Flap up
Left Tail
Flap up
Plane
banks left
Right Tail
Flap up
Plane
banks right
Plane climbs
Right Tail
Flap up
Left Tail
Flap down
Plane dives
Right Tail
Flap down
