1) Install Upper Hinge Brackets with
Spacer then center. Install clevis pin
top down to ensure parts are
aligned.
2) Nest Upper Door Sill Assembly
Assembled in Step 1 against ROPS
3) Ensure sill assembly is tight against
plastic roof
4) Tighten 3 hose clamps starting with
the rearward most first, the tail of
the hose clamp should point upward
when tightened.
5) Remove outer plastic panel from the
inside of the door by removing 6
screws (see photo next column)
6) Install molded handle with provided
hardware.
Tip: While door is uninstalled open
window
7) Remove Clevis Pin From Upper Door
Assembly.
Tip: Door may be easier to install with
window open.
8) At the Upper Door Sill Assembly
align Clevis Pin with Eye End located
at the end of the Upper Frame.
9) Once aligned install Clevis Pin and
secure with Cotter Pin
10) Align Brackets on Door Frame to
holes on the lower door.
