SPIERINGS SK375-AT3, Руководство пользователя

Страница: 85 / 228

SK375-AT3
Driving
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 0.0 4-15
Nov
2
0
1
4
C
h
a
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l
e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
4
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
Rotary switch on position R: backward / reverse
Use this position to switch the gearbox to backward / reverse :

After starting the diesel engine, it will run at idle speed. The electrical system chooses and
switches to a suitable acceleration to drive away backwards;

When switched from N to R , the gearbox will only switch if the diesel engine runs at idle speed
and the vehicle is not moving.
When the vehicle is moving, then the gearbox will not switch;

When switched from D(M) to R , the gearbox will only switch if the diesel engine runs at idle
speed and the vehicle is not moving.
When the vehicle is moving, then the gearbox will switch to N .
Rotary switch on position DM: manoeuvre forward / drive
Use this position to switch the gearbox to manoeuvre forward / drive :

When switched to DM , the gearbox will only switch if the diesel engine runs at idle speed and the
vehicle is not moving.
When the vehicle is moving, then the gearbox will not switch.
Rotary switch on position RM: manoeuvre backward / reverse
Use this position to switch the gearbox to manoeuvre backward / reverse :

When switched to RM , the gearbox will only switch if the diesel engine runs at idle speed and the
vehicle is not moving.
When the vehicle is moving, then the gearbox will not switch.
4.5.3. Automatic mode
After starting the diesel engine (§ 4.4. Start diesel engine truck ) the gearbox will be in the automatic
mode as default.
If the gearbox is in automatic mode , the display gearbox shows all horizontal beams and arrow heads
(§ 3.9.3. Display gearbox ).
By pushing the gear lever to the left, there can be switched between automatic and manual mode .
In automatic mode, the gearbox can also manually be switched to higher and lower gear by means of
the gear lever.
CAUTION!
In both forward / drive (D) , backward / reverse (R) , manoeuvre forward /
drive (DM) and manoeuvre backward / reverse (RM) the vehicle can roll away
(even without operating the accelerator)!