SK1265-AT6
Lubrication
Truck
SPIERINGS MOBILE CRANES USER MANUAL V 2.9
13-1
M
ei
2
0
1
8
Cha
n
g
e
s
a
n
d
t
y
p
o
g
ra
p
h
ic
a
l e
rr
o
rs
r
e
s
e
rv
e
d
.
©
2
0
1
8
S
p
ie
ri
n
g
s
M
o
b
ile
Cr
a
n
e
s
–
A
ll r
ig
h
ts
r
e
s
e
rv
e
d
.
13.
Lubrication
Lubrication of the Spierings vehicle consists of lubrication points, which can manually be greased and
lubrication points, which are provided with grease by the
automatic lubrication system
.
Also see the lubrication diagram, which will be separately supplied.
Lubrication is divided in:
•
Automatic lubrication system truck;
•
Manual lubrication truck.
13.1.
Automatic lubrication system truck
13.1.1.
Grease pump
The
automatic lubrication system truck
has one
grease
pump
).
This grease pump is controlled by means of a
timer
automatic lubrication system
truck
.
The grease pump (with reservoir) is situated behind the left-hand engine cowling (see
).
For checking and topping up, the left-hand cover plate of the engine cowling of the truck must be
removed. The grease in the grease reservoir must be above the
minimum level
.
Use the
lubrication nipple
for topping up.
Use grease according to the specifications mentioned in
§ 14.6. Specifications lubricants truck
CHECK / TEST!
Timely remove old grease!
CHECK / TEST!
Timely check the performance of the automatic lubrication system truck by
checking any lubrication point for the presence of grease.
Also see § 13.1. Automatic lubrication system
Picture 13-1