www.meped.io
3
mePed v2 Assembly Manual v1.0
PARTS LIST
PART NUMBER
ITEM
Body
1
Leg 1
2
Leg 2
3
Head
4
Retainer Clip
5
Setting Servo Center Position
Before starting to assemble your new mePed Walking Robot, it is important to center all 8 servos that came with the kit.
The following steps will help ensure all of the servos are rotated to their center or 90° position.
Attach a Servo Arm to the servo and then gently rotate the Servo Arm clockwise until the arm stops.
It is okay if the Servo Arm does not stop at the same angle shown in the illustration above. What is
important is that we find the end stop of the Servo.
Remove the Servo Arm from the Servo and reposition it to be perpendicular to the Servo body as
shown in this illustration.
Gently rotate the Servo Arm counter-clockwise until the Servo Arm is parallel with the Servo body as shown.
After the Servo Arm is parallel with the Servo Body, remove the Servo Arm and set it aside for later assembly.
This is the Servo's center position and it is important that all 8 Servos included in the kit are
centered before starting the mePed assembly.
Mini mePed
Along with the full size mePed kit, we have included a Mini mePed figurine to keep you company and help you build the full sized robot!
1. Insert Leg 1 into Body
2. Insert Leg 2 into Body
3. Insert Head into Body
4. Insert Retaining Clip through the notches in the Head
3
2
5
1
4
