Safety & Regulatory Information
Please read this guide carefully. It is important that all installation requirements are
followed.
Installation must be completed by a suitably qualified person (check your local regulatory
requirements).
Refer all servicing to Spidertracks qualified service personnel. Servicing is required when the
apparatus has been damaged in any way. Changes or modifications not expressly
approved by the party responsible for compliance could void the user’s authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his
own expense.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment
should be installed and operated keeping the radiator at least 40cm or more away from the
person's body.
Hereby, Spider Tracks Ltd declares that the radio equipment type Spider X (SKU 6000SX) is
in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address:
3
