Make sure again that the insert is in
it
ʼ
s place before inserting the Tension
Spring.
Tension Spring
Align the Tension Spring
ʼ
s holes with
the two holes at the Spider
ʼ
s bottom.
Page
2
Start by detaching your original Spider clip and
tension spring using the provided 3/32” Hex
wrench.
PLEASE NOTE: you may have received your
adapter clip already installed. If so, skip the
step mentioned above.
Installation -
Padded Section
To use the SpiderPro
P
ad
on the
padded section of the
SpiderPro Belt
:
Remove the
SpiderPro
Pad
and
Tension
Spring
as
shown
.
Be careful not to lose the Stainless Steel Insert from the SpiderPro Holster
Holster with
Long Clip
Tension
Spring
SpiderPro Pad
Continue
to Page 4
- Installation on the SpiderPro Belt
Holster Insert
