© 2014 Spicetone OÜ www.spicetone.com Võistluse 9, Tallinn 10132, Estonia, European Union
5 PRESET BANKS
When getting started with 6Appeal, you would probably want to stick with 24 PRESETS that you
can browse using PREV and NEXT footswitch or by turning the encoder.
For advanced setups you have the firepower of 6 PRESET BANKS at your command. This takes
the number of your customizable preset to a whopping 6x24=144, which most probably is more
than you’ll ever need. But it’s there.
If you plan to use the pedal in different setups, it is advisable to set up different sets of presets.
For example you can set Bank 1 for studio work, Bank 2 for stage and Bank 3 for solely
monophonic applications. Or set the banks up for different guitars. You can use up to six banks.
That takes your maximum number of presets to 144. Sure there’s no need to use all the
firepower, but it is there if you need it.
PRESET BANK SELECTION
Menu 10 Clock 11: Toggle to enter submenu
SUBMENU 10.11 SELECT PRESET BANK NUMBER
Clock 1…6 Bank1…6 Toggle On (
G
) / Off (
R
)
You can save a preset to another preset bank. Please see Chapter
for details.
SAVING A BANK. You can save all modified presets, i.e you can save the whole active bank. Or
you can save your active bank to another bank. Enter Submenu 10.11 (Menu 10, Clock 11).
DRIVE LED is blinking to indicate you’re in submenu. Clock 1…6 represent banks. Green marks
active. Turn ENC to any clock position you want to save to and long press ENC to save.
If you save to a new bank, the new bank is automatically activated after bank save. Please note
that in that case your settings is the previously active bank are not saved. If you want to have
two identical banks, first save the active bank to active, and then proceed saving it to a new
bank.
If you find your currently selected preset bank is utterly messed up, you can recall the factory
settings. This will erase all your presets in the currently selected bank.
RECALLING BANKS. Enter Submenu 10.11 (Banks). To recall the factory default bank to the bank
you are using (active bank marked with green LED). Long push ENC and FX simultaneously (ENC
slightly earlier and hold both longer than 2 seconds). The lights will flash, indicating the default
(initial) Preset Bank is loaded. You can only recall to active bank, not any other bank. NB!
Similarly to Preset Recall, loading of a bank to another bank only temporarily overrides it, unless
you follow the Save Bank process (long ENC on the bank’s position in Submenu 10.11).
