16
•
Slide the T-Flash card into the slot.
•
Attach the battery.
•
Push the battery cover until it clicks into place.
Charging the Battery
The device prompts a warning tone and message stating
insufficient battery when the battery power of your
device is low.
Please follow the instructions mentioned below to charge
your device:
•
Plug the connector of the charger into the jack of
the device.
•
Plug the charger into a standard AC wall outlet.
Note: When
is shown on the screen, it indicates that there is
not enough power and you should now charge your device. When
charging is complete, the battery icon will stop flashing. You
must fully charge the battery before using the device for the first
time. It is recommended to charge the battery for four hours
before using the device for the first time. If the device is turned on
during charging, you can still make or answer calls, but this will
consume battery power, thus will extend the charging time of the
device.
