Not to be distributed without prior consent of SPI Lasers UK Ltd.
Slide: 15
FS-S00149-Rev A
Once all inspections have taken place the laser can be mounted in to the machine.
3 ways of Mounting the laser.
•
Slide and 19” Rack
•
Ensure that the slide rails can take the weight of the Prism unit.
•
Bolt the front panel to the cabinet mountings.
•
Shelf and 19” Rack
•
Ensure the shelf thickness can take the weight of the prism unit.
•
Bolt the front panel to the cabinet mountings
•
Side Fixing and Rails
•
The side of the laser can be mounted to a slide unit
•
Customer is required to use all 12 mounting holes to support the weight of the unit
Customer Requirements Installation
Mounting Laser In to the Machine
29/06/2016
