SPI Infrared Thermal Infrared Camera, Руководство пользователя

Страница: 35 / 41

USER MANUAL
Page
35
•
After viewing the live image, power off the camera, the monitor (or other recording
device) and disconnect the cable.
Note:
•
Caution - power off the camera before connecting it to a monitor or a
recording device to avoid damaging the camera.
•
Until the video output option is selected on the camera, the image quality
displayed on an external monitor may be of poor quality.
Power Alarm
•
The power status for the camera is displayed at the top right corner of the outer
screen.
•
When power is low, an audible sound alarm will automatically notify the operator
every five minutes. A visual power status indicator is displayed as “ ” on the right
top of the screen to show a low power condition.
Battery Charging
Two methods are available to charge the battery.
•
Charging using the external battery charger.
•
Charging using the camera’s built-in battery charger.
Charging Using the External Battery Charger
•
Insert the battery into the battery charger.
•
Plug the charger into a standard electrical wall outlet (96-250VAC).
•
The charge lamp (orange) will light and charging will begin.
•
When the charge lamp changes to green, charging is completed.
•
If a fault condition occurs during charging, the charge lamp will change to red.
•
Once the battery is fully charged it can be used with the camera.
•
The approximate charge time is 300 minutes for normal charge and 360 minutes for a
full charge.
Charging Using the Built-in Battery Charger
•
Connect the 5VDC plug of the AC adapter to the converter supplied with the AC
adapter.
•
Insert the USB plug of the converter into the USB interface of the camera.