SPHINX
Project Ten Service Manual
5
Rear panel
11.
ON/OFF
: This is the mains power switch.
12.
Fuse holder
: Contains a fuse (3.15 A slow).
13.
AC Power
: Connect the mains cable to a mains
power outlet (230 - 240 VAC).
14.
CONTROL OUT:
To connect the optical cable
going to another Sphinx component.
15.
RIGHT OUTPUT:
To connect the cable from the
right loudspeaker:
red
+
white
-
16.
LEFT OUTPUT:
To connect the cable from the
left loudspeaker:
red
+
white
-
17.
Manufacturer's label:
This shows important
data for the component, such as serial number
and mains power voltage.
18.
BALANCED LINE 2 RIGHT:
To connect the
XLR signal cable (balanced cable) from the right
output of the signal source for Input 2.
19.
BALANCED LINE 2 LEFT
: To connect the XLR
signal cable (balanced cable) from the left
output of the signal source for Input 2.
20.
CINCH/BALANCED:
This switch is to select the
input connector for LINE 2:
out
LINE 2 (cinch)
in
BALANCED LINE 2
21.
LINE 2:
To connect the cinch signal cable from
the signal source for LINE 2.
22.
LINE 1:
To connect the cinch signal cable from
the signal source for LINE 1.
23.
TUNER:
To connect the cinch signal cable from
the tuner.
24.
CD:
To connect the cinch signal cable from the
CD player.
25.
TAPE IN:
Connect this input to the output of the
recorder.
26.
TAPE OUT:
Connect this output to the Input of
the recorder..
11
12
13
14
15
16
17
18
19
20
21 22
23 24 25 26
