SPHINX MYTH 7, Руководство пользователя

Страница: 8 / 16

SPHINX Myth 7
8
Selecting AM or FM
Select the desired band (AM or FM) with the
BAND button on the Remote (4).
The display shows the selected band:
Fout! Onbekende schakeloptie-instructie.
If you recall a programmed station from memory the
correct band for this station is automatically selected
and displayed.
Auto Tuning
To activate the automatic station search function
(AUTO TUNING): press the
m
TUN
Ù
or
Ú
button
(1 or 2) until the frequency display starts to ‘run’,
then release the button.
C
The display shows AUTO; this indication will
disappear as soon as the function is completed.
D
For each new search the tuner automatically
switches to STEREO. A bar graph indicates signal
strength: more dashes meaning a stronger signal.
The search stops as soon as a sufficiently strong
station is found.
As soon as you have exactly tuned the station you
will see a triangle illuminated:
Ù Ù
.
E
The station frequency is indicated in kHz (AM) or
MHz (FM).
When the search stops the AUTO COMPARE
function first checks whether the tuned station is
already stored in memory. If so, the memory location
is displayed plus the station name (if you have
assigned it one).
Stations with a weak signal may be skipped,
although these can be tuned manually.
At any time you can interrupt the search function by
pressing either of the
m
TUN
Ù
or
Ú
button (1 or 2).
Manual Tuning
F
With each brief press off the
m
TUN
Ù
or
Ú
button
you tune step-wise in the desired direction (FM: 25
kHz; AM: 1 kHz).
Holding a button depressed will activate the Fast
Scan mode to rapidly scan large frequency ranges.
Releasing the button will automatically activate the
AUTO TUNING function (during which MUTING is
also active).
With a brief press on the
m
TUN
Ù
or
Ú
button you
again select Manual Tuning and the AUTO display
disappears. As with the AUTO TUNING, the
illuminated triangle and the number of dashes
indicate reception quality.
G
The AUTO COMPARE function also verifies whether
the found station has already been stored in
memory.
Bandwidth selection
You can improve reception quality by switching the
bandwidth from (WIDE) to (NARROW). A 'narrow'
bandwidth increases the selectivity and thus reduces
interference from powerful neighbouring stations.
The
m
N/W-button (8) selects the bandwidth. The
display shows the selected bandwidth.
H