4
III. Safety instructions
Pay attention to the voltage description on the rating label, and ensure that the power
cord is connected to correct power outlet type.
If this power cable is damaged, it must be replaced by the manufacturer, customer
service centre or a similarly qualified person in order to prevent safety hazards.
Disconnect the power supply when cleaning and performing any maintenance.
NOTICE! To prevent any damage!
Disconnect the refrigerator and other consumer items from the battery before you connect
the battery to a quick charging device.
Over-voltage can damage the electronics of the device.
Refrigerator can only be maintained by an authorized person, improper maintenance
may lead to unexpected dangers or damages.
Corrosive materials cannot be stored in this appliance.
The appliance should be placed in a dry place, to prevent it from water splashing, rain
and moisture. Do not immerse it into water.
Do not place the appliance near heat sources such as heaters or direct sunlight.
Make sure the appliance is used in a well-ventilated area for normal operation.
The appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The appliance is only to be used with the power supply unit provided with the appliance.
IV. Preparing before use
1. Use a damp cloth to clean the refrigerator inside and outside when you use it for the
first time. Specifics please refer to the
“Cleaning and maintenance”
.
2. For convenience, the lid can be opened from either side/end. Also you can remove the
lid completely by using both lid latches at the same time. (This is great if used in a
restricted height installations that prevents complete opening of the lid for access)
3. Energy-saving tips
-Select a well-ventilated place and keep the refrigerator away from heat or direct sunlight.
-Reduce the frequency and duration times to a minimum with the lid open.
-Selecting correct temperature setting
