Sphere Onyx S2, Инструкция по эксплуатации

Страница: 5 / 26

Refer to the screen to see its func on
1. Aim the AUX RCU at the Sphere RCU at 3-5cm apart
2. PRESS & HOLD LEARN bu on on Sphere RCU for 5 Seconds
3. On the Sphere RCU PRESS the learning bu on you wish to program
4. Then press the bu on on the AUX RCU that you wish to control
5. Repeat steps 3 & 4 for each of the 5 learning bu ons
6. PRESS the LEARN bu on to exit Learning mode.