6 WWW.SPEXSEATING.COM
SPEX HEAD SUPPORT USER MANUAL
Installing Mounting Block
4mm Hex Key
1.
Bolt the mounting block directly to the back support using
the M6 x 25mm screws and washers. Use a 4mm hex key to
tighten the bolts.
Attaching Pad to Mechanism
5mm Hex Key
1.
Loosen both bolts in the top clamp to allow the ball on the headrest
pad to insert into the socket.
2.
Partly tighten the bolts on the top clamp so the headrest pad can
move but is not loose.
3.
Position the headrest pad correctly, then securely tighten the bolts
using a 5mm hex key.
Adjusting Stem Height
3mm Hex Key
1.
Loosen the grub screw in the ‘Drop Stopper’ using a 3mm hex key.
2.
Unwind the clamp lever on the mounting block and shift the stem
up or down to the new position. Tighten the clamp lever to secure.
3.
Tighten the grub screw in the ‘Drop Stopper’ to fix the stem height
when taking the Head Support on and off the wheelchair.
A
DETAIL
A
SCALE
1 : 5
