The IRT100 thermometer is a non-contact infrared thermometer. Simply aim the
thermometer at the target and press the 'Scan key' to display the surface temperature.
Laser Information
By partially pressing the 'Scan key', the device will begin to measure the
temperature of the target When the 'Scan key' is completely depressed,
the laser wm operate.
A
CAUTION!
'Scan' button
'Mode' button
1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE LASER
BEAM-PERMANENT EYE DAMAGE MAY RESULT.
2. USE EXTREME CAUTION WHEN OPERATING THE LA.SER.
3. NEVER POINT THE DEVICE TOWARDS ANYONE'S EYES.
4. KEEP OUT OF REACH OF All CHILDREN.
�C OR °F MODE
To change the thermometer from '°C' to wF' or from '°F' to '°C', first turn the instrument
on by pressing the 'Scan key', then press the 'Mode key' four times, the '°C' or '°F'
symbol will flash, press the 'Scan key' to change to scale.
MINIMUM OR MAXIMUM MODE
To utilize the thermometer's minimum or maximum mode, first turn the instrument on
by pressing the 'Scan key', then press the 'Mode key' once for minimum or twice for
maximum function. The 'MIN' or 'MAX' icon will flash, then press the 'Scan key' to
confirm the minimum or maximum mode. The thermometer will display the minimum or
maximum reading only.
LOCK MODE
The lock mode is particularly useful for continuous monitoring of temperatures.
To utilize the thermometer's LOCK mode, first turn the instrument on by pressing the
'Scan key', then press the 'Mode key' three times for the lock mode function. The lock
icon will flash, then press the 'Scan key' to confirm the lock mode. The thermometer
will continuously display the temperature for up to 60 minutes or until the 'Scan key' is
pressed again.
