6
7
Decimal Type
Although the decimal is commonly expressed as the “.” symbol (i.e., 20.6
or 1000.53), some (European) countries use a “,” symbol to represent the
decimal (i.e., 20,6 or 1000,53). The meter defaults to the period symbol.
To adjust:
1. Enter the decimal type function from Setup Mode (see page 5).
“dEC” appears on the LCD.
2. Press ▲ or ▼ to select Basic (.) or Euro (,). Press
ENTER
to
save the selection.
Auto Power Off
The meter automatically turns off after 10 minutes of inactivity,
however this function can be disabled.
1. Enter the auto power off function from Setup Mode (see page 5).
“PoFF” appears on the LCD.
2. Press ▲ or ▼ to select yes (auto power off enabled) or no
(auto power off disabled). Press
ENTER
to save the selection.
Touch-Tone
1. Enter the touch-tone function from Setup Mode (see page 5).
“bEEP” appears on the LCD.
2. Press ▲ or ▼ to select yes (touch-tone enabled) or no
(touch-tone disabled). Press
ENTER
to save the selection
Thermometer Type K/J
1. Enter the thermometer type function from Setup Mode
(see page 5). “tYPE” appears on the LCD.
2. Press ▲ or ▼ to select K or J. Press
ENTER
to save
the selection.
Temperature Units
1. Enter the temperature units function from Setup Mode
(see page 5). “t-CF” appears on the LCD.
2. Press ▲ or ▼ to select C (degrees Celsius) or F (degrees Fahrenheit).
Press
ENTER
to save the selection.
