Rev 6/3/10
Emissivity
is the ability of an object to emit or absorb energy. This instrument measures emitted energy using a fixed emissivity
value of 0.95 (which covers about 90% of typical applications). When measuring highly reflective surfaces, apply masking tape to
the surface or a paint that has a 0.95 emissivity. If the object you are measuring is covered with frost, clear the frost to expose the
object's surface before taking the measurement.
Battery Replacement:
1. Thermometer:
When the battery icon flashes on the LCD (2), the thermometer battery is low and should be replaced. Twist
off the Battery Access (4) and replace the two 1.5V LR44 batteries (5).
2. LED Light:
When the flashlight is dim or fails to operate, the battery should be replaced. Twist off the Battery Access (4) and
replace the 1.5V AAA battery (5).
Care:
Keep the protective cover on the IR Lens (1) when not in use. Clean the lens with compressed air, use a soft brush, or
carefully wipe the surface with a moist cotton swab. Do not use solvents. The housing may be cleaned with a moist cloth.
Protect the instrument from water, physical or electrical shock, dust, and extreme environments.
Specifications:
•
Temperature range:
-27
o
~ 482
o
F (-33° ~ 250°C),
Resolution:
0.1
o
F/0.1°C when under 200°C, 1
o
F/1°C when over 200°C,
Response time:
1 second.
•
Accuracy:
±2% or 2°C, whichever is greater.
•
Operating temperature:
32
o
~ 122
o
F (0°~ 50°C),
Storage temperature:
-4
o
~ 138
o
F (-20°~ 60°C).
•
Dimensions:
6" x 1/2" (152 x 13mm),
Weight:
2 oz (60 g).
•
Included Accessories:
Foam-lined metal carrying case, batteries and instructions.
Warranty:
Sper Scientific warrants this product against defects in materials and workmanship for a period of 5 years from the
date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued,
an equivalent Sper Scientific product will be substituted if available. This warranty does not cover damage resulting from
accident, misuse, or abuse of the product. To obtain warranty service, ship the unit postage prepaid to:
SPER SCIENTIFIC LTD, 7720 E Redfield Rd, Suite 7, Scottsdale, AZ 85260 USA
WWW.SPERSCIENTIFIC.COM, [email protected].
The defective unit must be accompanied by a description of the problem and your return address. Register your product online
or return your warranty card within 10 days of purchase.
