THERMOMETER
7
minus T2 mode.
The temperature difference
is shown on the right hand
side display as shown in Fig.
4.6 Relative Operation:
When pressing the “
△
REL
” button, the meter will
memorize the present reading and the difference
between the new reading and the memorized data will be
shown on the display. Press the “
△
REL
” button again to
exit the Relative operation. When the meter is under
relative operation, “
°C/°F
” button is disabled. (When you
press “
°C/°F
” button in relative mode, there will be two
continuous beep)
4.7 MAX/MIN Operation:
When pressing the "MAX MIN" button the meter will enter
the MAX/MIN mode. Under this mode the maximum
value, minimum value is kept in the memory
simultaneously and updated with every new sample of
data.
When the MAX symbol is display, the Maximum is shown
on the display.
Press "MAX MIN" again, then the MIN symbol is on the
display and also the minimum reading.
Press "MAX MIN" again, MAX, and MIN will blink together.
This means that all these data is updated in the memory
and the reading is the present temperature.
One may press "MAX MIN" to circulate the display mode
among these options.
When the meter is under "MAX MIN" operation and
“ °C/°F ”
,
“
△
REL”
button are disabled.(when you press
