Spengler EFFItens AMI, Инструкция по эксплуатации

Страница: 17 / 140

EN
FR
ES
IT
DE
NL
AR
EFFItens AMI
®
I 15
electromagnetic Immunity
The blood pressure monitor is intended for use in the electro-
magnetic environment specified below. The customer or the
user of the blood pressure monitor should assure that it is
used in such an environment.
Immunity
Test
Electrostatic
discharge
(ESD) IEC
61000-4-2
Electrical fast
transient/b
urst
IEC 61000-
4-4
Surge
IEC 61000-
4-5
Voltage dip,
short
interruptions
and voltage
variations
on power
supply
input lines
IEC 61000-
4-11
IEC
60601
test level
±6 kV
contact
±8 kV air
±2 kV for
power
supply
lines
±1 kV
line(s) to
line(s)
<5 % U
T
(>95 %
dip in U
T
)
for 0.5
cycle
40 % U
T
(60 % dip
in U
T
) for 5
cycles
70 % U
T
(30 % dip
in U
T
) for
25 cycles
<5 % U
T
(>95 %
dip in U
T
)
for 5 s
Compliance
level
±6 kV
contact
±8 kV air
±2kV for
power
supply
lines
±1 kV line(s)
to line(s)
<5 % U
(>95
T
% dip
in U
T
) for 0.5
cycle
40 % U
T
(60 % dip
in U
T
) for
5 cycles
70 % U
T
(30 % dip in
U ) for T
25 cycles
<5 % U
T
(>95 % dip
in U
T
)
for 5 s
Electromagnetic
Environment -
Guidance
Floors should be
wood, concrete or
ceramic tile. If floors
are covered with
synthetic material,
the relative humidity
should be at least
30%.
Mains power quality
should be that of a
typical commercial
or hospital
environment.
Mains power quality
should be that of a
typical commercial
or hospital
environment.
Mains power quality
should be that of a
typical commercial
or hospital environ-
ment. If the user of
the blood pressure
monitor requires
continued
operation during
power mains
interruptions, it is
recommended that
the blood pressure
monitor be powered
from an uninterrup-
tible power supply
or a battery.