Spengler CL Series Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 45

background image

5

CL & PSL50 Series

SERVICE OVERVIEW

Annual service tasks

Annual service required equipment

The service tasks listed below are to be done on an annual basis to guarantee good

dispenser functionality and maintain warranty compliance. Step-by-step instructions

are provided on the following pages.

•  Clean canisters, canister outlets
•  Clean spout adaptor, replace mixers, Black Coffee Kit
•  Clean air channel, replace air filters
•  Clean espresso brewer
•  Install espresso brewer service kit
•  Reassemble espresso brewer
•  Drain boiler
•  Clean monobrewer
•  Install monobrewer service kit
•  Reassemble monobrewer
•  Clean bean hopper
•  Clean grinder, replace outlet
•  Replace grinder soft ring
•  Replace fast mixer motor assembly
•  Replace overpressure valve
•  Clean dispenser interior
•  Reinstall bean hopper
•  Reinstall air channel and filters
•  Reinstall spout adaptor, mixers, Black Coffee Kit
•  Reinstall canisters
•  Reinstall espresso brewer
•  Reinstall monobrewer

Important:

The Annual Service (12 month service tasks) shall only be performed by a
trained technician using all required safety equipment as outlined during the
training session(s) and service kits from the original equipment manufacturer.

The following cleaning equipment/consumable items are required to perform the
annual service tasks.

•  Door key
•  Cleaning cloth/sponge
•  Mild kitchen cleaning spray
•  Service access code (available from the service technician or distributor)
•  Air filter material (PN10034178)
•  Fast mixer unit* (PN10032974)
•  Mixer bracket assembly (PN 10011038)
•  Espresso Service Kit

*

(PN10021379)

• Monobrewer Service Kit

*

(PN10037202 for coffee or PN10037220 for tea)

•  Overpressure Valve  (PN10024356)
•  Non-return valve (PN100246950)
•  Grinder outlet* (one per grinder - PN10031032)
•  Grinder soft ring

*

(one per grinder - PN10032591)

• Grinder adjustment ring

*

(one per grinder - PN10031008)

Items marked with a

“*”

are only required if the dispenser is equipped with the

applicable system.

«
...
3
4
5
6
7
...
»

Содержание CL Series














































Отзывы:

Нет отзывов

Похожие инструкции для CL Series

Бренд: U-Line Страницы: 21

PerfectCoffee MC06

Бренд: Waeco Страницы: 128

Бренд: UFESA Страницы: 41

Бренд: Hotpoint Страницы: 8

Бренд: U-Line Страницы: 45

Бренд: Fagor Страницы: 17

Ice Cream Maker 746-080

Бренд: Ide Line Страницы: 19

Caf 3 in 1 Coffee Maker KDC120

Бренд: Kambrook Страницы: 10

Бренд: Krups Страницы: 11

ESPREMIO AUTOMATIC ES6400 Series

Бренд: Rowenta Страницы: 50

Бренд: Sage Страницы: 14

Бренд: Hoshizaki Страницы: 41

Бренд: Andersson Страницы: 28

Бренд: Palsonic Страницы: 14

Бренд: Bellini Страницы: 8

Бренд: Frigomat Страницы: 97

Бренд: Brother Industries Страницы: 37

Бренд: Ideen Welt Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды