3
•
Register and store with these instructions: lot number, place and date of purchase, first date of use, date of checks, name
of users, any comments.
•
Do not store the device underneath any heavy objects which could cause structural damage.
•
Store in a cool, dry, dark place and do not expose to direct sun.
•
Store and transport device in its original packaging.
•
The device not be exposed to or come into contact with any source of combustion or inflammable agents.
•
Attention: laboratory testing, post production tests, instruction manuals cannot always consider every possible scenario
for use. This means that in some cases the performance of the product could be notable different from results to date
obtained. Instructions are continually being updated and are under tight surveillance of fully qualified staffs with
adequate technical formation.
•
As a distributor or end user of products manufactured and/or marketed by Spencer Italia S.r.l., you are strictly required to
have a basic knowledge of any legal requirements applying to the devices contained in this supply that are in power in the
goods final destination Country (including laws and norms regarding technical specifications and/or safety requirements)
and therefore you are also strictly required to have the necessary knowledge to guarantee all aspects regarding the total
conformity of the products to the regulations in the relevant territory.
•
Promptly notify Spencer Italia S.r.l. regarding any revisions to be made by manufacturer in order to guarantee the
conformity of the product to the territory’s legal specifications (including those resulting from rules and/or norms of
other nature).
•
Act, with all due care and diligence, and contribute to ensure conformity to general safety requirements of all devices
marketed in the territory, by providing final users with all necessary information for carrying out periodical checks on
their devices, as specified in the relevant user’s manual.
•
Actively contribute to product safety checks on products sold, by communicating any relevant risk analysis information
both to the manufacturer and to any competent authorities so that the necessary action can be promptly taken.
•
The distributor or final user is aware that in the event of any failure to conform to the above mentioned requirements
you will be deemed fully responsible for all damages that might occur. Therefore Spencer Italia S.r.l. expressly disclaims
any responsibility and/or liability for your non-compliance with the present regulatory provisions.
2.2
Specific warning
•
In order not to interfere with movements, do not over-tighten the belt.
2.3
Contraindications and side effects
The use of this device, if used as described in this manual, does not present any contraindications or collateral effects.
3. DESCRIPTION OF PRODUCT
3.1
Intended use
Logic is a personal protective equipment intended for lumbar support. It is not intended to provide protection from bumps,
but to encourage a proper movement of the back during any lifting efforts that may be necessary during the rescue
operations.
3.2
Technical data
Dimensions:
1700 x 25 mm
Lenght of padded support:
800 mm
Lenght of polypropylene belt:
1500 mm
Weight:
350 g
3.3
Reference standards
The device has been constructed in accordance with the requirements contained in Appendix II - Directive 89/686/CEE.
3.4
Environmental conditions
The product should be stored in a well-ventilated place, away from light, extreme temperatures and corrosive or aggressive
elements.
4.
OPERATING INSTRUCTIONS
4.1
Functioning
1 - Pull the belt around your lower back taking care to keep exposed the part with the rear reflective strip.
2 - Attach the belt using the buckle on the closure straps.
3 - Adjust the belt tension acting on the length regulator, in order to get a good support but without compromising the
comfort and the movements required during rescue operations.