81234-4rA XMPF10N5_24 SI Manual.docx
Page 2 of 5
SAFETY
DANGER
HIGH VOLTAGE
RISK OF ELECTROCUTION
Observe extreme caution when working with this equipment
High voltage power supplies must always be connected to
protective earth
Do not touch connections unless equipment is turned off and
the capacitance of both the load and power supply are
grounded
Allow adequate time for discharge of internal capacitance of
the power supply
Do not ground yourself or work under wet or damp
conditions
Servicing Safety
Maintenance may require removing the Instrument cover with
the power on
Servicing should only be done by qualified personnel aware
of the hazards
If in doubt, return to supplier for servicing
