EN
4
Connecting 4648 serial receiver
1
2
3
4
5
A
B
E
R
F
6
7
8
tx
rx
rev6
Power
boot
1
2
3
4
5
6
7
8
6
5
4
3
2
1
GP
FT
+vbat–
3v3 GND
SP
M4648
1
2
3
4
5
A
B
E
R
F
6
7
8
Connecting DSMX receivers with a remote receiver
Connecting 4649T serial receiver
tx
rx
rev6
Power
boot
1
2
3
4
5
6
7
8
654321
GP
FT
+vbat–
3v3 GND
BIND
1
2
3
4
5
A
B
E
R
F
6
7
8
Adding A Ground Wire For Two Battery Systems
The wire harness is confi gured for use with aircraft that use a single battery for
video and control systems, so there is a common ground. If separate batteries
power the video and control systems, a ground wire will need to be connected
along with the signal wire for the frequency control system to work.
Connecting the Video Transmitter to Spektrum Receivers
The VT1000 video transmitter is controlled by a Spektrum serial signal. Connect
the video transmitter to receivers using one or more remote receivers or in paral-
lel with a serial receiver. The video transmitter does not share power with the
receiver, it only picks up the signal.
Use the included Y-Harness or solder the white signal wire from the video trans-
mitter in parallel with the signal wire from the receiver.
Compatibility
The VT1000 can be used with conventional Spektrum DSMX
receivers that use a remote receiver, as well as the 4648
and 4649T serial receivers.
Spektrum Programmable Features
The Spektrum SPMVT1000 lets pilots control video transmitter features from a
menu in Spektrum Airware
™
transmitters without accessing the video transmitter
on the model.
From the transmitter pilots can manage:
•
Video transmitter power output
• Operating
frequency
This function requires a Spektrum serial signal. This feature is compatible with
Spektrum Airware radio control systems using a full range DSMX
®
receiver with a
remote receiver or a DSMX serial receiver connected to a fl ight controller.
Registering the transmitter and updating the fi rmware may be required for
access to this feature.
For more information on Spektrum Telemetry visit: http://www.spektrumrc.com
