iX20
Spektrum™ AirWare™ Change Log
2020-August 14
Version 1.03.12
Corrections & Improvements
•
When programming a Custom Report using the Combo Switch w/Throttle Stick
could cause a short duration loss of RF. This has been corrected.
•
In Forward Programming orientation images for new receivers are now included.
Version 1.03.07
Corrections & Improvements
•
In the previous update Dual Rate and EXPO were not being properly applied to
existing model after the update. This has been corrected.
•
In Heli mode the Dual Rate and EXPO switch options are now selectable.
•
The wireless trainer system is now working correctly as an instructor.
•
Existing templates are no longer being lost when the system is updated
Version 1.03.03
New Features
•
Bind N Fly and SAFE models are now supported with 2 templates for streamlined
model setup.
•
Switch B is now defaulted to channel 7
•
Available flight modes in air have been increased to 10
•
More curves are available in DR/Expo, Throttle Curve, Acro Pitch Curve, 1Axis
Gyro Curve and Flap to Elevator Mix to support the additional flight modes
•
Cyclic Sequencing is now supported. Used for programing continuous flashing
lights, creating repeated moving accessories etc.
•
The default for digital switch positions when using more than three flight modes
has been changed to integrate the up to 10 available flight modes in the AR637T
AS3X receiver.
•
Dashboard screen now allows Temp/RPM/Volts to be added after the ESC is
configured
Corrections & Improvements
•
Left and Right trimmers are now working properly when set as Flight Mode trims
•
The default frame rate is now set to 22ms When using Smart Telemetry