Spektrum Fat Shark SPMVR1100, Инструкция по эксплуатации

Страница: 7 / 20

EN
7
Powering the Downlink Kit
Option 1
• Connect a 1-cell (1S) Li-Po (not included) directly to the downlink kit.
Option 2
• Using the included Y-harness, connect the downlink kit directly to the 1-cell (1S)
flight battery of your aircraft.
CAUTION:
Always land the model before the battery reaches low voltage
cutoff (LVC), otherwise power will be lost to the receiver and camera.
Immediately land the model and disconnect the flight battery to prevent over-
discharge. Never use the included Y-harness with sailplane models.
1-cell (1S) Li-Po
(EFLB1501S45, EFLB1501S25)
1-Cell (1S) Li-Po
Y-Harness
Downlink kit
Downlink Kit
Receiver board
To Downlink Kit
To Receiver Board
To Battery