4
Spektrum DX5r • tranSmitter inStruction manual
EN
INSTAllING BATTERIES
ChARGING AND WARNINGS
ChARGING ThE OPTIONAl lIThIUM ION BATTERy PACk
CAUTION:
NEVER remove the transmitter batteries
while the model is powered on. Loss of model control,
damage or injury may occur.
CAUTION:
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to
state and local laws.
Installing Optional lithium Ion Battery Pack
IMPORTANT:
Set the transmitter battery type to Li-Ion in the
Display/Battery menu and ensure the battery voltage alert is set
to the proper voltage. See the
System
section for more details.
Failure to exercise caution while using this product and comply
with the following warnings could result in product malfunction,
electrical issues, excessive heat, FIRE, and ultimately injury and
property damage.
• Read all safety precautions and literature prior to use of this
product
• Never
allow minors to charge battery packs
• Never
drop charger or batteries
• Never
attempt to charge damaged batteries
• Never
attempt to charge a battery pack containing different
types of batteries
• Never
charge a battery if the cable has been pinched or
shorted
• Never
allow batteries or battery packs to come into contact
with moisture at any time
• Never
charge batteries in extremely hot or cold places
(recommended between 50–80˚ F or 10–27˚ C) or place in
direct sunlight
• Always
disconnect the battery after charging, and let the
charger cool between charges
• Always
inspect a new battery before charging
• Always
terminate all processes and contact Horizon Hobby
if the product malfunctions
• Always
keep batteries and charger away from any material
that could be affected by heat.
• Always
end the charging process if the charger or battery
becomes hot to the touch or starts to change form (swell)
during the charge process
NOTICE:
Only use the recomended power supply (SPM9551)
with the DX5R transmitter.
Always charge the transmitter on a heat-resistant surface.
1.
Power off your transmitter.
2.
Connect the power supply (SPM9551) connector to the
Li-Ion charge port located through the opening in the battery
door.
3.
Connect the power supply to a power outlet using a country
specific adapter.
4.
Disconnect the transmitter from the power supply once
charging is complete and disconnect the power supply from
the power outlet.
CAUTION:
Never leave a charging battery unattended.
CAUTION:
Never charge a battery overnight.
CAUTION:
Never connect an external battery charger to
the transmitter.
1.
Remove the battery cover from the bottm of the transmitter.
2.
Remove the AA battery holder and disconnect from the
transmitter power port.
3.
Connect the battery pack to the transmitter power port.
4.
Install the battery pack into the transmitter.
5.
Install the battery cover.
1.
Remove the battery cover from the bottom of the transmitter.
2.
Install 4 AA batteries as shown.
3.
Install the battery cover.
